One of my readers sent me his excellent solution that allows him to use his Black Rapid Fastener and Dolica quick release plate. Dolica AX620B100 and Black Rapid SportFor a Dolica quick release plate to use it with a black rapid sport requires a few modifications if you want to use both without having to switch. Technically this works on any similar designs with a 5mm or more available space under the quick release plate. I didn’t want to spend the money for a Manfrotto tripod for it to be compatible, and even that has issues with tolerances.Suggested fixes were Black Rapid’s recommended M-plate by Custom SLR is $70 and Really Right Stuff has an L plate for $60. For $17.95 you can replace the fastener with Black Rapid’s FR-T1 Manfrotto RC2 version and skip the adapter plate. Unfortunately while looking up the FR-T1 the same issue pops up with the neck of the screw blocking the inset of the quick release. Black Rapid sent me the specifications and compared to the Dolica fastener everything is relatively the same except for the inset.So… Remove the offending material! Really, it’s made out of stainless steel, it’s going to hold either way. No guarantees but if you’re paranoid of the screw coming out or metal breaking you can use an op/tech H uni-loop as a backup to a top connection(more about using the uni-loop as backup). It is the perfect size to connect from behind the Black Rapid carabineer to one of the top points of the Canon Rebels.Get a grinder, dremel, etc. with a bit that can grind stainless steel. Take the lip down to the hole in your quick release so it can inset for the least amount of wiggle. You can use Sugru to rubberize it and fill in gaps as well so things don’t slide around. Connect it all up and secure the carabineer with gaffers tape (does not leave residue) to make sure the slide does not retract.